Heatsavr™ is a permanent solution for residential or commercial pools, and is guaranteed to save energy and water in every pool.

The HS140 Heatsavr™ Liquid Pool Cover Kit is designed to supply you with everything needed to install and set up a Heatsavr™ Liquid Solar Pool Cover system.

HeatSavr Liquid Pool Cover Complete System:

• Fully automated
• Energy savings
• Maximize your green potential
• Water conservation
• Chemical Savings

The kit includes:

• 4 – 1Ltr. bottles of Liquid Pool Cover with a total of 140 ounces of the Heatsavr™ solution
• Automatic Metering System (HS115)
• installation package
• a wall mount bottle holder
• an all weather cover and
• Liquid Pool Covers instruction manual

The Automatic Metering System (HS115) is a 7 day programmable peristaltic pump, designed for the application of Heatsavr™. Each system is custom programmable to exactly fit any pool's size and hours of operation.

Heatsavr™ is an effective liquid pool cover that greatly reduces heat loss and evaporation from your exposed pool surface. Heatsavr™ is made of simple biodegradable ingredients that form the best barrier currently available to slow the heat and water loss that causes high heating bills and cold pool water. Heatsavr™ slows evaporation substantially.

Evaporation is one of the main forms of heat loss from swimming pools and spas. Slowing it can yield large cost savings. Heatsavr™ will lower humidity as well as evaporation. It takes money to buy heat, and heat to evaporate water, so slowing evaporation will lower humidity, as well as heating costs.

Heatsavr™ will save energy in EVERY heated pool, but energy savings vary according to the hours of swimmer use per day, ventilation efficiency, air temperature, wind exposure, pool design, equipment and especially the type and cost of fuel used. The cost of energy also varies from region to region. Tests have proven that heat bill savings range from a low of 15.5% at a high use 50 meter municipal pool, to a high of 40% at a low use condominium or hotel pool. Savings and benefits can be achieved in all indoor or outdoor pools, regardless of the shape or size.

Heatsavr™ is designed for commercial and residential pool applications and Ecosavr is designed for residential applications, the difference being in the delivery system. Heatsavr™ can be applied manually or by the Automatic Metering System (AMS). Ecosavr™ is a small disposable plastic fish containing the Heatsavr™ liquid. The liquid solar pool cover is dispense through a patented valve in the fin and forms a transparent, mono-molecular layer on your pool.

Ecosavr™ is convenient and easy to use: just snip the fin, squeeze out any air and toss it into your pool. With no cover to roll up or store, your pool is ready to use whenever you want!

Heatsavr™ is added directly to the pool water at a rate of 1oz per 400 sq. ft. of surface area. Either apply manually on a daily basis, or use our Automatic Metering System to administer the product for you.

Common Questions about Heatsavr™

1. Can people swim while Heatsavr™ is in use?

   Yes. Heatsavr™ has been designed to be in use 24 hours per day. This gives Heatsavr™ a distinct advantage over standard pool blankets.

2. Can Heatsavr™ be used along with a standard pool blanket?

   Yes. Heatsavr™ will work when the blanket is off, and will reduce heat loss around the edges and tears when the blanket is on.

3. Is Heatsavr™ safe for filters and plumbing?

   Yes. Heatsavr is a non-corrosive product that will have no detrimental effect on pipes, valves, chlorine controllers, or filters commonly used in pool applications.

4. Is Heatsavr™ environmentally friendly?

   Yes. Not only does Heatsavr™ bio degrade into safe, simple compounds, but the reduction in energy use is especially beneficial. Swimmers in the pool won't know it's in use!

5. Is Heatsavr™ easy to use?

   Yes. This product is very easy to use. It will take about two minutes per day to apply, and it fits easily into the pool routine. When combined with an auto injection system, it becomes even easier.

Other Information

• For best results, Heatsavr™ should be applied once at the end of the pool-use day.
• Add Heatsavr™ directly to the pool water at a rate of 4 oz. per 1500 sq.ft. of pool surface area (width x length).
• Heatsavr™ may be stored for a long period of time without losing strength. Avoid storing below 65 degrees F (18.4 C). If white residue forms at the bottom, immerse bottle in warm (tap) water until residue disappears.
• In concentrated form, Heatsavr™ is flammable and should be stored safely. If eye contact occurs, wash with water for 15 minutes and contact a physician.